Default Settings After The Run-Up Phase - HBM espressoDAQ DQ401 Bedienungsanleitung

50
for module DQ430:
Full bridge:
1 V excitation
2.5 V excitation
Half bridge:
1 V excitation
2.5 V excitation

8.5 Default settings after the run-up phase

Under "Measurement channel setup":
Default: data rate 50 Hz / Auto
LED A (channels 1, 2, 3, 4)
Overflow: +12 mV/V
Underflow: −12 mV/V
Overflow: +4.8 mV/V
Underflow: −4.8 mV/V
LED B (channels 1, 2, 3, 4)
Overflow: +12 mV/V
Underflow: −12 mV/V
Overflow: +4.8 mV/V
Underflow: −4.8 mV/V
Meaning of the LEDs
A2888−1.1 en/de