Herunterladen Inhalt Inhalt Diese Seite drucken

Manitou EASY 2-Serie Bedienungsanleitung Seite 161

Inhaltsverzeichnis

Werbung

IT
Riscaldamento immediato con Longpress
(senza imposta zioni)
Tasto
Longpress, per più di 2 secondi.
(Vedi immagine 27h)
Riscaldatore On
Indicazione per i riscaldatori ad aria in moda-
lità di riscaldamento continuo (impostazione di
fabbrica).
p
Avvertenza! All'accensione vie-
ne visualizzato per 2 sec. "On"
e quindi la durata di esercizio
residua o
nei riscaldatori ad
aria. I valori impostati vengono
prelevati dal riscaldamento pre-
cedente. Con Longpress durante
il riscaldamento l'indicazione
commuta al sottomenu Riscal-
damento Impostare valore no-
minale temperatura – (solo per il
riscaldatore ad aria) e Impostare
durata di esercizio. Durante il ri-
scaldamento si può commutare
ad un'altra opzione del menu.
Verificare la durata di esercizio
nell'opzione
Ventilazione
menu, eventualmente impostar-
la
(Vedi immagine
27i).
Riscaldamento Off con Longpress
(Vedi immagine 27j)
Display
On,
viene
visualizzata
Riscaldamento del menu.
Tasto
Longpress, per più di 2 secondi.
Riscaldatore Off.
Dopo l'indicazione Riscaldamento Off viene vi-
sualizzata la videata iniziale. In Illuminazione
veicolo Off dopo 10 secondi si spegne l'illumina-
zione del display.
Heating immediately with Longpress
(without settings)
Press the
2 seconds.
.
(See image 27h)
Heater On
Display for air heaters in continuous heating
mode (factory setting).
p
Please note! After switching on,
"On" is displayed for 2 sec and
then the remaining operating
time or
values are copied from the pre-
vious hea ting mode. If Long-
press is pressed during hea ting
mode the display switches to
the Heat ing submenu Set Tem-
perat ure Setpoint (only for air
hea ter) and Set Operating Time.
During heating mode it is pos-
sible to s witch to another menu
item. Under the Ventilat ion
menu item, check the operat-
ing time and if necessary adjust
del
(See image
Heating Off with Longpress
Display On, the Heating menu item is displayed.
Press the
l'opzione
2 seconds.
Heater Off.
After the Heating Off the Start display appears.
If the vehicle lighting is Off the display lighting
goes out after 10 seconds.
EN
EN
Longpress button for longer than
.
27h
27i
for air heaters. Set
27i).
(See image 27j)
Longpress button for longer than
27j
2-109
DE
ES
Sofort
Heizen
mit
Longpress
Einstellungen)
Taste
Longpress, länger als 2 Sekunden
drücken.
(Siehe Abbildung 27h)
Heizgerät Ein
Anzeige bei Lufterhitzern im Dauerheizbetrieb
(Werkseinstellung).
p
Hinweis! Nach dem Einschalten
wird für 2 Sek. „Ein" und an-
schließend die Restdauer oder
bei Lufterhitzern angezeigt. Die
Einstellwerte werden vom vorhe-
rigen Heizbetrieb übernommen.
Bei Longpress während des Heiz-
betriebs wechselt die Anzeige in
das Untermenü Heizen Tempera-
tursollwert einstellen – (nur für
Lufterhitzer ) und Betriebsdauer
einstellen. Während des Heiz-
betriebs kann in einen andern
Menüpunkt umgeschaltet wer-
den. Im Menüpunkt Lüften die
Betriebsdauer prüfen und ggf.
einstellen
(Siehe Abbildung
Heizen Aus mit Longpress
(Siehe Abbildung 27j)
Display Ein, es wird der Menüpunkt Heizen
angezeigt.
Taste
Longpress, länger als 2 Sekunden
drücken.
Heizgerät Aus.
Nach der Anzeige Heizen Aus wird die Startseite
angezeigt. Bei Fahrzeugbeleuchtung Aus erlischt
die Beleuchtung des Displays nach 10 Sekunden.
(ohne
.
27i).

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mrt 1440 easy 55p 400 st4 s2Mrt 1440 easy 75p 400 st3b s2Mrt-x 1440 easy 75p 400 st3a s2Mrt 1640 easy 55p 400 st4 s2Mrt 1640 easy 75p 400 st3b s2Mrt-x 1640 easy 75p 400 st3a s2 ... Alle anzeigen

Inhaltsverzeichnis