Available Models And Information On Installation - HBM CMD Serie Bedienungsanleitung

CMD
Tips for piezoelectric measurement technology
range. Sensors of the same series (e.g. CFT/50 kN ...
CFT/120 kN) deliver the same amount of charge for a
specific force. Differences are explained by the type and
construction of the pre‐stress, which represents a force
shunt. This is necessary, to achieve good linearity and
hysteresis properties.
14.2 Available models and information on
installation
HBM offers two different piezoelectric force sensor
designs: the CFW force washer and the CFT force trans­
ducer.
Fig. 14.3 Type CFW and CFT piezoelectric force sensors from
HBM
A2781-3.1 HBM: public
65