Alde Compact 3020 HE Montageanleitung Seite 49

11. ACTIVATION OF INSTALLED FUNCTIONS
The first time you use the heating system, check that the right accessories/functions are activated.
This also applies when you supplement the heating system with accessories/functions.
Activate accessories/functions by pressing on Installed Accessories, (see figure 1) and checking the box for the func-
tion/accessory in question to activate (see figure 2 to 5).
Figure 1
4/4
Settings
Figure 2
1/4
Inst Acc
Third party Panel
Load Monitor
The relevant box must be checked if you have:
Connected an external panel or Alde Smart
Control
(part no. 3020 057).
Connected a load monitor.
Connected a 12 V pump that can be variably
adjusted manually.
Connected a PWM controlled 12 V pump that
has variable speed control and is set from the
panel.
Connected a booster.
Figure 3
2/4
Inst Acc
Main Manual 12V
Main Remot 12V
Figure 4
3/4
Inst Acc
Booster
Duo Control
EisEx
Connected a gas bottle changer
(DuoComfort or DuoControl).
Connected a defroster (EisEx).
Connected a 12 V pump to the underfloor
heating.
Connected an additional hot water tank to
increase the hot water capacity and also obtain
continuous hot water
Connected a 12 V pump for heating the vehi-
cle's engine through the Alde heating system.
Figure 5
4/4
Inst Acc
Underfloor Heating Pump
Alde Flow
Engine Pre-Heat Pump
.
(part no. 3020 160)
21
49