List Of Signal References - HBM ClipX Bedienungsanleitung

Index Subindex
0x6320 1
0x6321 1
0x6322 1
0x6323 1
0x6330 1
9.7.9

List of signal references

If you want to specify a signal as a subindex in the object dictionary (see
„Measuring channel objects" on page
values in this list. Enter 4 for the gross signal and 5 for the net signal for
example.
Designation
Electrical value (field
value)
Gross
Net
218
Function
Analog output scaling 1
process value.
Analog output scaling 1
field value.
Analog output scaling 2
process value.
Analog output scaling 2
field value.
Analog output field value
(read only).
Value Explanation
Input signal in the unit of the measured variable,
2
e.g. in mV/V.
3 Gross signal.
4 Net signal.
Value
Scaling value 1 for the analog
output in the unit of the source
signal, FLOAT.
Physical value 1 for the analog
output in the unit V or mA,
FLOAT.
Scaling value 2 for the analog
output in the unit of the source
signal, FLOAT.
Physical value for the analog
output in the unit V or mA,
FLOAT.
Analog output in V or mA.
You cannot change the output
value directly. Output a value
via the test signal – see
0x4500.10: Analog output test
value and 0x4500.11: Analog
output test value active, FLOAT,
RO.
180), you must always add 1 to the
ClipX
Operation via fieldbus