Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Designation
Calculated value 1
Calculated value 2
Calculated value 3
Calculated value 4
Calculated value 5
Calculated value 6
External Eth. value 1
External Eth. value 2
External FB value 1
External FB value 2
Analog output
9.6.2
System status: List of status bits
The following table sets out the bits in the system status (32 bits) if the status in ques-
tion is set.
Status/error
Device ready
Sync Master
Sync Slave
Sync slave no sync
in
Changing parame-
ter set
ClipX
Operation via fieldbus
Bit
Explanatory note for bit set i.e. value is invalid
21
Value of calculated channel 1.
22
Value of calculated channel 2.
23
Value of calculated channel 3.
24
Value of calculated channel 4.
25
Value of calculated channel 5.
26
Value of calculated channel 6.
27
Value 1 transmitted via Ethernet.
28
Value 2 transmitted via Ethernet.
29
Value 1 transmitted via the fieldbus.
30
Value 2 transmitted via the fieldbus.
31
Value of the analog output in V or mA.
Bit
Explanation for bit set
0
The ClipX is switched on, initialized, and the Ether-
net connection is live.
1
The device is configured as the master for CF syn-
chronization.
2
The device is configured as a slave for CF synchro-
nization.
3
The device is configured as a slave for CF synchro-
nization but no signal is connected.
4
The active parameter set is being switched.
153
Werbung
Inhaltsverzeichnis
