Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BF LED
Status
Off
off
Flashing
(2 Hz)
red
On
EtherNet/IP™ LEDs (MS, NS, only BM40IE)
MS LED
Status
Off
off
Flashing
(1 Hz)
green
On
/
Flashing
red/
(1 Hz)
green
Flashing
(1 Hz)
red
On
NS LED
Status
Off
off
Flashing
(1 Hz)
green
On
ClipX
Electrical connections, LEDs
Meaning (bus error LED)
No error.
No data exchange.
Error: No configuration, slow physical connection or no
connection.
Meaning
The ClipX is not on.
Standby: The ClipX has not been configured.
The ClipX is running and error-free.
The ClipX is running a self-test.
Simple error: The ClipX has detected a reparable error, e.g.
an incorrect configuration.
Serious error: There is an irreparable error, please contact
HBM - see
„Technical support" on page
Meaning
The ClipX is not on, or has no IP address.
No network connection. But the ClipX has been assigned
an IP address.
The ClipX is connected to a network device, e.g. a switch.
231.
31
Werbung
Inhaltsverzeichnis
