HBM ClipX Bedienungsanleitung Seite 179

Index Subindex
0x4D20 200
201
FIFO (for up to six signal sources)
See also „Operation and content of the ClipX-FIFO" on page
1000 values (4000 from firmware 2.0) each are available for storing measured values.
The oldest values are overwritten when all memory locations are occupied. At the same
time the overflow bit is set (FIFO control flags).
Index Subindex
0x4428 1
0x4428 2
0x4428 3
0x4428 4
ClipX
Operation via fieldbus
Function
HTTP response
Info
Function
FIFO control flags, deter-
mine the mode of operation
of the FIFO and contain
error information.
Number of values in FIFO,
level.
Trigger definition to fill the
FIFO, bit mask Low word
(32 bit).
Trigger definition to fill the
FIFO, bit mask High word
(32 bit).
Value
Status of http server, UINT16,
RO.
Status of PPMP firmware:
0: Off
1: Waiting for IP address
2: Creating socket
3: Connecting
4: Connected
5: Connection failed
6: Host (destination computer)
not found
7: Connection interrupted,
UINT16, RO.
107. 6 FIFO channels with
Value
See FIFO control flags
0 ... 1000 (4000 from firmware
2.0), UINT32, RO.
32
0 ... 2 -1, see „Digital flags:
List of I/O flags (I/O status)" on
page 157, UINT32.
table.
177