HBM ClipX Bedienungsanleitung Seite 167

Abb. 64: Watch table after polling color of system LED (example)
In the example, the display is green (value 2, line 8 or 9) and valid, as no error bit (line 7)
is set.
In the following example an attempt is made to read a non-existent object.
Abb. 65: Watch table after polling a non-existent object
In the example, the error "Not found" (value 4 in line 7) is outputted.
In the following example effect 9 (rapid green flashing for 10 s) is set for the system LED
(object 0x4200.3).
ClipX
165
Operation via fieldbus