HBM ClipX Bedienungsanleitung Seite 85

Example 1: Determining minimum, maximum and mean value, outputting captured
value at maximum
1
0
1
0
Duration
Abb. 43: Tolerance window; Determining minimum, maximum and mean value
Example 2: Monitoring for undershooting (Threshold Low) and overshooting (Threshold
High). OK/NOK is evaluated via the Threshold High/Threshold Low flags. The values for
Maximum Value, Minimum Value, Peak-to-Peak and Mean are additionally available.
1
0
1
0
Duration
Abb. 44: Tolerance window; Monitoring for underflow and overflow
See also „Peak with capture" on page 84
ClipX
Starting up the ClipX
t
Duration
Threshold High = 1 → NOK
Input OK
Threshold High
Maximum Value
Minimum Value
Threshold Low
Start
Stop
t
Captured
at Max
Hold Channel
Maximum Value
Mean
Peak-to-Peak
Input
(Meas. signal)
Minimum Value
Start
Stop
Peak-to-Peak
83