Index
Subindex
0x5010
5
0x510n
1 ... x
In the following tables n is used to signify the position of the block.
Unused outputs are assigned the value 48 by default (see
page
218). You can also use the value to free up an assigned output in order to use it in
another calculation.
ClipX
Operation via fieldbus
Function
Error bits of the calculated
channel.
Parameters of the block at
position n (1 ... 6), see fol-
lowing tables.
Value
0: No error
1: Insufficient parameter stor-
age
2: Insufficient storage space in
the dynamic object dictio-
nary
4: No further instances of this
block type allowed, UINT16,
RO.
The numbers, types and mean-
ings of the parameters depend
on the block type.
„List of signal references" on
193