Calibration Certificates - HBM ClipX Bedienungsanleitung

C
10
ALIBRATION CERTIFICATES
In production of the ClipX, HBM draws up a declaration of compliance with the order 2.1
in accordance with EN 10204 or a manufacturer's certificate O in accordance with DIN
55350 part 18. You can download this working standard calibration certificate through
your browser and by choosing the Device Storage menu on the ClipX, and save it to your
PC. The working standard calibration certificate for your ClipX is also available to down-
load from the HBM website at
calibration-certificates/.
You can also upload your own certificates to the device: Device Storage menu.
The ClipX working standard calibration certificate includes the following calibrations:
• Calibration of full bridge DC in the measuring ranges 2.5 mV/V and 5 mV/V,
• Calibration of voltage ±10 V,
• Calibration of current ±20 mA.
ClipX

Calibration certificates

https://www.hbm.com/en/6871/support-download-
221