HBM ClipX Bedienungsanleitung Seite 185

Index Subindex
0x4411 1
2
3
4
0x4411 5
6
7
8
0x4415 1
2
3
Special Values (value in case of an "invalid" signal, Test Signal)
Index Subindex
0x440A 1
2
0x440B 1
2
ClipX
Operation via fieldbus
Function
"Tare by" function, bit mask
Low word (32 bit).
"Tare by" function, bit mask
High word (32 bit).
Invert "Tare by" function.
"Tare" command.
"Clear tare value by" func-
tion, bit mask Low word
(32 bit).
"Clear tare value by" func-
tion, bit mask High word
(32 bit).
Invert "Clear tare value by"
function.
"Clear tare value" com-
mand.
Zero value.
Tare value.
Zero target value.
Function
Test signal.
Test signal active.
Value in case of "invalid".
Value active in case of
"invalid".
Value
32
0 ... 2 -1, see „Digital flags:
List of I/O flags (I/O status)" on
page 157. UINT32.
0: Not inverted
1: Inverted, UINT8.
WO
32
0 ... 2 -1, see „Digital flags:
List of I/O flags (I/O status)" on
page 157. UINT32.
0: Not inverted
1: Inverted, UINT8.
WO
FLOAT.
Value
FLOAT.
0: Not active
1: Active, UINT8.
FLOAT.
0: Not active
1: Active, UINT8.
(Only in case of value "invalid").
183