HBM ClipX Bedienungsanleitung Seite 116

Method
Save parameter
set.
Switch parame-
ter set.
Read OD.
Write OD.
1)
Supported data types are BOOLEAN, UINT8, INT8, UINT16, INT16, UINT32, INT32, FLOAT,
DOUBLE and STRING. Arrays are not supported.
114
Function
The device settings
are saved in the
active parameter
set.
Switch the param-
eter set.
Read from the
„Object dictionary"
on page 159.
Write to the „Object
dictionary" on
page 159.
Arguments
—
Parameter set
number
(Number of the
desired param-
eter set 1 ... 10).
Index
Subindex.
Index
Subindex
Value.
Operation via Ethernet/OPC UA/PPMP
Return values/Comments
The return status "good"
merely signifies that the
function was success-
fully started. The device
takes a few seconds to
save, and the save opera-
tion is not separately
confirmed.
The return status "good"
merely signifies that the
function was success-
fully started. You can
identify the switching
operation by the "Chang-
ing parameter set" bit in
the system status.
Value
The read value as data
type Variant. The actu-
ally transmitted data type
is determined by the
object being read
Value is of data type Vari-
ant. But you have to
specify the actual trans-
mitted data type. The
type must match the data
type in the object directo-
1)
ry .
1)
.
ClipX