Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12.2
FAQs
Does the ClipX have any fuses that need changing?
No. The ClipX has an internal current limiter to automatically regulate the power con-
sumption in the event of a fault.
Are there any moving parts that would have to be maintained?
No. The ClipX manages without fans and the like, and is maintenance free.
Are the plugs protected to prevent accidental interchanging?
At the time of delivery, no. But you can use the supplied coding pins to code the plugs
and so protect them against accidental interchanging.
What connector options are available?
The multipoint connectors are supplied as standard in the form of push-in terminal
connectors. You can order screw-type plug terminals, for example from Phoenix Con-
tact – see
„Electrical connections, LEDs" on page
What are the options for adjusting the measuring amplifiers?
You have three options:
1.
Use sensors with TEDS (Transducer Electronic Datasheet).
2.
Enter sensor sensitivity values (zero point/span) as numerical values.
3.
Calibrate sensor sensitivity values.
What are the options for connecting the ClipX to a web server?
You can use a direct 1:1 connection via Ethernet or an Ethernet connection over your
network – see
„Connecting a web browser to the ClipX" on page
Can I reset the Ethernet network settings (IP address) to their factory defaults?
Yes. Use the push button on the front of the ClipX to do so – see
network settings (DHCP), enabling fixed IP address" on page
Do I have to install operating software?
No. The ClipX has an internal web server for parameterization. All you need is a browser,
such as Windows Internet Explorer (min. version 9), Firefox or Google Chrome.
ClipX
Diagnostics and error rectification, FAQs
19.
68.
„Resetting Ethernet
75.
227
Werbung
Inhaltsverzeichnis
