Cia 404 Objects - HBM ClipX Bedienungsanleitung

9.7.8

CiA 404 objects

Index Subindex
0x6000 1
0x6100 1
0x611C 1
0x6120 1
0x6121 1
0x6122 1
0x6123 1
0x6124 1
0x6125 1
0x6130 1
0x6138 1
216
Function
Read all Lines.
Analog input field value.
Analog input TEDS control.
Analog input scaling 1 field
value.
Analog input scaling 1
physical value.
Analog input scaling 2 field
value.
Analog input scaling 2
physical value.
Analog input offset.
Analog input autozero.
Analog input process value.
Tare zero.
Value
0: Digital input 0 (debounced)
1: Digital input 1 (debounced),
UINT8, RO.
Measurement value in V, mA,
Ohm, mV/V depending on sen-
sor type, FLOAT, RO.
0: Ignore TEDS
2: Use TEDS, if available
3: TEDS required, UINT8.
Scaling value 1 in the unit of
the input variable, e.g. in mV/V,
FLOAT.
Scaling value 1 in the unit of
the physical variable, FLOAT.
Scaling value 2 in the unit of
the input variable, e.g. in mV/V,
FLOAT.
Scaling value 2 in the unit of
the physical variable, FLOAT.
Zero value (offset) in the unit of
the physical variable, FLOAT.
Zero balancing.
Writing 0x6f72657a to this
object sets the gross measure-
ment value to 0, UINT32, WO.
Gross measurement value in
the unit of the physical vari-
able, FLOAT, RO.
Tare value in the unit of the
physical variable, FLOAT.
Operation via fieldbus
ClipX