Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2
Dismounting from a support rail
3
Abb. 4:
Dismounting from a support rail
1.
Push the ClipX up.
The spring mechanism allows you to release it from the top locator on the support
rail.
2.
Tilt the ClipX forward, rotating it as you do so.
3.
Detach the ClipX downwards.
5.3
Other mounting options
Instead of using a support rail, you can mount the ClipX on a wall, for example, using an
appropriate bracket. To do so, make a mounting bracket to fit on the back of the ClipX.
Important: The vents on the back must not be covered over. The minimum
clearance between the back of the device and a wall in the area of the vents
is 8 mm.
16
2
1
ClipX
Mounting
Werbung
Inhaltsverzeichnis
