I/O Objects - HBM ClipX Bedienungsanleitung

Index Subindex
0x4300 75
76
9.7.5

I/O objects

Digital I/O
Index Subindex
0x4702 1 ... 2
0x4703 1 ... 2
188
Function
Command "Write TEDS data
to file" (to device storage).
The filename is generated
automatically, and is
located in object 0x4300:76
(next line). Any existing file
with the same name is
overwritten.
The setting for use of TEDS
must be "TEDS required" or
"Use TEDS if available".
Filename for the TEDS data
according to the syntax
"IEEE1451_4_Manufactur-
erCode_ModelNumber_Ver-
sionLetter_VersionNumber_
SerialNumber.ted". The
identifier "PD" is used for
the SerialNumber 0. If no
VersionNumber is present,
this identifier is not appli-
cable. If no file could be
generated, the object is
empty.
Function
Digital output 1 ... 2, bit
mask of digital flags Low
word (32 bit).
Digital output 1 ... 2, bit
mask of digital flags High
word (32 bit).
Value
WO.
RO.
Value
32
0 ... 2 -1, see „Digital flags:
List of I/O flags (I/O status)" on
page 157. UINT32.
Operation via fieldbus
ClipX