HBM ClipX Bedienungsanleitung Seite 219

Index Subindex
0x6139 1
0x6140 1
0x6150 1
0x61A0 1
0x61A2 1
0x6303 1
0x6310 1
ClipX
Operation via fieldbus
Function
Analog input autotare.
Analog input net process
value.
Analog input status.
Analog input filter type.
Analog input filter cut-off
frequency.
Analog output link output
physical value.
Analog output type.
Value
Tare.
Writing 0x61726174 to this
object sets the net measure-
ment value to 0, UINT32, WO.
Net measurement value in the
unit of the physical variable,
FLOAT, RO.
Supported:
0: Invalid
3: No sync signal
4: TEDS-fault
5: TEDS available, UINT8, RO.
Supported:
0: Filter off
3: Bessel low-pass filter
4: Butterworth low-pass filter,
UINT8.
If an unsupported frequency is
written, the ClipX changes the
frequency to the nearest avail-
able value, FLOAT.
Supported values:
Index 0x44F0; Subindex 0 ... 30,
see „List of signal refer-
ences" on page
= 1
Index 0x6130; Subindex 1;
Length = 1; automatically
converted to 0x44F0.3
Index 0x6140; Subindex 1;
Length = 1; automatically
converted to 0x44F0.4,
UINT32.
Supported values:
0: Off
10, 11: 10 Volt
21, 22: 4 ... 20 mA, UINT16.
218; Length
217