HBM ClipX Bedienungsanleitung Seite 209

Tolerance window (block type 15)
Index Subindex
0x510n 20
21
22
23
24
25
30
31
32
33
34
35
36
0x510n 37
38
ClipX
Operation via fieldbus
Function
Input, the observed signal.
Input Hold Channel, the
value to be held at the
extreme value of the
observed signal.
Threshold High.
Threshold Low.
Start with.
Stop with.
Output Maximum Value.
Output Minimum Value.
Output Peak-to-peak.
Output Captured at Max,
Captured Value (subindex
21) at maximum of input
(subindex 20).
Output Captured at Min,
Captured Value (subindex
21) at minimum of input
(subindex 20).
Output Mean.
Output Duration, i.e. time
[ms] since start flag.
Output Threshold High, flag
for upper threshold value
exceeded.
Output Threshold Low, flag
for lower threshold value
undershot.
Value
0 ... 47, see „List of signal refer-
ences" on page 218, UINT16.
Flag number 0 ... 63, see
tal flags: List of I/O flags (I/O
status)" on page 157. UINT8.
21 ... 26, 48, see „List of signal
references" on page
INT16.
Flag number 12 ... 19, 64, see
„Digital flags: List of I/O flags
(I/O status)" on page
UINT8.
„Digi-
218,
157,
207