HBM ClipX Bedienungsanleitung Seite 207

Timer (block type 13)
Index Subindex
0x510n 20
21
22
23
24
25
26
27
28
29
ClipX
Operation via fieldbus
Function
Start/Stop with.
Enable by.
Start on.
Enable on.
Interval (ms).
Pulse length (ms).
Type.
Output Time (ms).
Output Timer Flag.
Level Active Timer Flag.
Value
Flag number 0 ... 63, see
tal flags: List of I/O flags (I/O
status)" on page 157. UINT8.
0: Start at High level
1: Start at Low level, UINT8.
0: Enable on High level
1: Enable on Low level, UINT8.
UINT32.
0: Continuous
1: Single shot, UINT8.
21 ... 26, 48, see „List of signal
references" on page
UINT16.
Flag number 12 ... 19, 64, see
„Digital flags: List of I/O flags
(I/O status)" on page
UINT8.
0: High level is issued at output
during pulse length
1: Low level is issued at output
during pulse length, UINT8.
„Digi-
218,
157,
205