HBM ClipX Bedienungsanleitung Seite 175

Index Subindex
0x4270 3
4
5
6
11
0x4271 1 ... 10
50
ClipX
Operation via fieldbus
Function
Save current parameters
from the RAM permanently
under this parameter set
number (overwrite existing
parameter set).
Define start parameter set
number (permanently
stored in the system
parameters).
Mode for switching param-
eter set via the debounced
digital inputs.
Reset current parameters in
the RAM to their factory
defaults (but this
save the parameters per-
manently).
Flag indicating whether a
parameter in the parameter
set has been changed in the
current settings.
Name of the parameter set
in question.
Current parameter set
name.
You save the parameter set
under this name with com-
mand 0x4270.3.
Value
1 ... 10, INT16, WO.
1 ... 10, UINT16.
0: Deactivated
1: Use only digital input 1
2: Use digital inputs 1 and 2,
UINT8.
WO.
does not
0: Not changed
1: Changed, UINT8.
STRING, RO.
STRING.
173