HBM ClipX Bedienungsanleitung Seite 194

9.7.6 Objects of the calculated channels
The individual functions are sorted by the values for the block type (see next table).
Functions of calculated channels
Index Subindex
0x5001 1 ... 6 = n
0x5010 4
192
Function
Block type at position n.
Change order.
Value
1: No function block
2: Adder/Multiplier
3: Logic modules
4: Divider
5: Signal generator
6: 6x6 Matrix
7: Cartesian-to-polar coordi-
nates
8: Polar-to-Cartesian coordi-
nates
9: Pulse-width measurement
10: Peak with capture
11: Counter
12: Checkweigher
13: Timer
14: PID controller
15: Tolerance window
16: Trigger
17: Integrator
18: Filter (IIR, Bessel/Butter-
worth)
19: Standstill detection
20: Differentiator
21: Multiplexer
22: Moving average / RMS
23: FIR filter
24: Comb filter, UINT16.
n = 1 ... 5, UINT16, WO;
The block at position n is
exchanged with the block at
position n+1.
Attention: The parameters of
the exchanged blocks thus
also exchange their indices
(0x510n and 0x510n+1).
Operation via fieldbus
ClipX