HBM ClipX Bedienungsanleitung Seite 168

Abb. 66: Watch table after setting an effect for the system LED
Effect 9 (line 4 or 5) was set, as no error bit (line 9) is set.
Access to acyclic data with EtherCAT/TwinCAT
You can set and poll acyclic data values in the CoE-Online tab. In the following example
the currently displayed color of the system LED is polled (object 0x4200.6).
Abb. 67: Polling color of system LED (example)
In the example, the display is green (value 2, line "value") and valid, as no error bit (last-
but-one line "error") is set.
In the following example an attempt is made to read a non-existent object.
ClipX
166
Operation via fieldbus