LED state during a firmware update
SYS
Status
LED
On or flash-
ing
Red
/
Flashing
Yel-
low/red
On
Yellow
Flashing
Yellow
Flashing
Green
EtherCAT LEDs (RUN, ERR, only BM40IE)
RUN
Status
LED
Off
off
Flashing at
2.5 Hz
Single flash
green
On
ClipX
Electrical connections, LEDs
Meaning
The ClipX is booting up (initializing everything).
The ClipX checks the file integrity, copies or expands files.
The ClipX clears the CPU flash memory.
The ClipX stores the new program in the CPU flash.
The ClipX checks the CPU flash memory.
Meaning
The ClipX is in the INIT state.
The ClipX is in the PRE-OPERATIONAL state.
The ClipX is in the SAFE-OPERATIONAL state.
The ClipX is in the OPERATIONAL state.
29