Mounting; Dismounting - HBM TIM-PN Montageanleitung

6

Mounting

TIM-PN
The interface module TIM-PN is mounted on a DIN EN
60715 rail.
A spring on the back holds the housing in position.
6.1 Mounting
1. Hook the interface module into the upper guide of the
DIN rail.
2. Press the housing against the DIN rail until the spring
engages in the lower guide.
6.2

Dismounting

1. Push the housing up vertically and then tilt it slightly
forward.
2. Pull the housing out downwards from the DIN rail.
A4341-2.0 HBM: public
Mounting
13