Operation Of The Machine - Optimum OPTImill F 80 Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
6.5

Operation of the machine

6.5.1 Turning on the CNC- machine

Switch on the main switch.

Please wait until the control is completely started.

Press the pushbutton "Drive control ON"

Unlock the "Emergency-Stop push button"
- on the spindle head (not visible in the picture),
- on the MCP,
- on the electronic handwheel (not visible in the picture),

Close - if not yet closed - the sliding door.

Press the pushbutton "Reset"
2
Img.6-2: Operating area
GB F80 | F105
Page 266
®

"Lockable main switch" on page 215
.
1
.
2
.
3
1
3
Translation of the original instructions
Operation
Version 1.1.2 dated 2019-05-07