Optimum OPTImill F 80 Betriebsanleitung Seite 319

Brief instruction 808D Milling
SEQUENCE
Press "Reset" on the MCP to stop the spindle
Press the "Back" SK on the PPU
808D
Workpiece Setup
rotation
Create
workpiece
offset
Make sure the active tool is the measured tool!
Press the "Machine" key on the PPU.
Press the "JOG" key on the MCP.
Press the "Meas. work." SK on the PPU.
As the following red frame shows, 808D provides the user with three methods of using
tools to simplify the operating process.
Set Meas. Meas.
T,S,M
rel work. tool
Page 319
OPTIMUM
M A S C H I N E N - G E R M A N Y
A tool must have be created and measured
before it can be used to set the workpiece
offset.
Back
Face
Sett.
cutt.
Operating and Programming — Milling
Meas.
work.