Authorized Staff; Operator Positions - Optimum OPTImill F 80 Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
1.7.2

Authorized staff

INFORMATION
For working on the CNC-machine sufficient expertise is required. No one must work on
the machine without having the necessary education, not even for a short while.
As aid for training and operation we recommend to use the CNC-Software SinuTrain.
SinuTrain made by Siemens is the perfect software-supplement for the CNC-maschine
F80 | F105 of Optimum Maschinen Germany GmbH
This training software supports the rapid training for the operation of the control Sinumerik Sie-
mens SINUMERIK 808D. Employees having little CNC-experience can learn the basics of the
DIN-programming by using SinuTrain and are finally able to write and test programs using
SINUMERIK 808D.
Please find SinuTrain and further information on the website of Siemens.
http://www.cnc4you.siemens.com
WARNING!
Inappropriate operation and maintenance of the CNC-machine constitutes a danger for
the staff, objects and the environment.
Only authorized staff may operate the CNC-machine !
Persons authorized to operate and maintain should be trained technical staff and instructed by
the ones who are working for the operating company and for the manufacturer.
The operating company must
train the staff,

instruct the staff in regular intervals (at least once a year) on

- all safety standards that apply to the CNC-machine,
- operation of the CNC-machine,
- accredited technical guidelines,
- possible emergency situations,
check staff's state of knowledge,

document training/instruction in a operation book,

require staff to confirm participation in training/instructions by means of a signature,

check whether the staff is working safety- and risk-conscious and observe the operating

instructions.
The operator must
be specially trained in handling and programming the CNC-machine,

know and understand the program sequence and which effects the individual process

parameters will have,
keep an operator's log,

before taking the machine in operation

- have read and understood the operating instructions,
- be familiar with all safety devices and instructions.
For work on the following CNC-machine parts there are additional requirements:
Electric components or operating materials: Must only be performed by a qualified electri-

cian or person working under the instructions and supervision of a qualified electrician.
1.8

Operator positions

The operator position is in front of the CNC-machine at the sight window or on the machine
control panel.
GB F80 | F105
Page 214
®
Translation of the original instructions
Obligations of
the operating
company
Obligations of
the operator
Additional
requirements
regarding the
qualification
Safety
Version 1.1.2 dated 2019-05-07