Optimum OPTImill F 80 Betriebsanleitung Seite 293

Interval Where?
Maintenance
Version 1.1.2 dated 2019-05-07
What? How?
Manually
Check the quantity and refill the lubricant tank
of the central lubrication system. Refer to
Filling level control
"Cooling lubricants" on page 290
Check the oil level in the oil collecting gutter.
Empty
Empty the oil collecting tank.

"Save data function" on page 242
Oil all bare steel surfaces. Use an acid-free
Oiling oil, e.g. weapon oil or motor oil.
Lubricating Press the push-button of the central lubricat-
ing system.
Status control of Check for liquid level, concentration, pH
filling level value, bacteria and fungal decay.
Check the ph-value.If required, replace the
pH value measur-
cooling lubricant.
ing
Check the liquid level and refill if required.
Filling level control
Check
Check the drive belt on wear and excessive
clearance.
Readjusting
If required, readjust the gear belt and/or replace it.
Replacing
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y

F80 | F105
®
Check

GB
Page 293