Optimum OPTImill F 80 Betriebsanleitung Seite 358

Brief instruction 808D Milling
If the connection is lost
select the drive path and
press "Connect." SK
This will re-establish the
connection with PC/PG.
This will be shown with the
text "Connection succeeded"
Press "Program Manager" Button
Press "netwo. Drive" SK to
enter the network drive
interface.
Press "Enter" Button to open
network drive to PC/PG.
808D
Additional Information Part 1
SEQUENCE
You can now see the
content of the shared folder
with all the machining
programs.
You can select the file you
require to execute in AUTO
mode, click "Exe.
Execution".
The system will
automatically jump to AUTO
mode, select the
appropriate NC program.
Press the "Cycle Start"
button for machining
operation.
Note: You can also use the "Copy", "Paste" key to achieve "NC", "USB" and "Network
Drive" moving files.
Page 358
OPTIMUM
M A S C H I N E N - G E R M A N Y
Operating and Programming — Milling