Optimum OPTImill F 80 Betriebsanleitung Seite 238

OPTIMUM
M A S C H I N E N - G E R M A N Y

Adjust a pressure of 6.3 bars using the set screw of the maintenance unit.
Air pressure switch
Manometer
Compressed air drainage
ATTENTION!
In order to ensure a failure-free operation of the machine it is necessary that the required
air pressure is continuously applied on the machine at constant quality. In case of
insufficient air supply, for instance interruptions occur during tool change.
GB F80 | F105
Page 238
®
Img.3-8: Compressed air maintenance unit
Translation of the original instructions
Compressed air supply
Pneumatic oiler
Assembly and commissioning
Version 1.1.2 dated 2019-05-07