Technical Specification - Optimum OPTImill F 80 Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
2

Technical specification

The following information represents the dimensions and indications of weight and the manu-
facturer's approved machine data.
2.1 Electrical connection
Total connection
2.2 Milling spindle
Power of spindle drive S1 operation
Power of spindle drive S6-30 % operation
Torque S1 operation
Torque S6-30 % operation
Speed
Spindle seat
2.3 Lubricant/coolant system
Power of the cooling lubricant pump [ W ]
Tank capacity [ litre ]
2.4 Compressed air
min. connection [MPa]
Air consumption
Recommended compressed air quality
Compressed air consumer
2.4.1 Compressed air service unit
Drainage filters
Housing
max. pressure
Recommended oil lubricator for com-
pressed air
Quantity of oil Lubricator for compressed air
Dewatering
Compressed air connection thread
GB F80 | F105
Page 222
®
F80 (Advanced)
3 x 400V ~ 50Hz 12 KVA
( 3 x 400V ~ 50Hz 14 KVA )
2.2 kW
( 3.7 kW )
3.2 kW
( 5.5 kW )
14 Nm
( 24 Nm )
22 Nm
( 35 Nm )
50 - 8000 rpm
( 50 - 10000 rpm )
ISO 30 / BT 30 x 45°
650
70
0.1 - 0.15 m
• Tool changer forward / backward
• Tool clamp / unclamp
• Option, clamp of rotary table (F105 Advanced)
Translation of the original instructions
F105 (Advanced)
3 x 400V ~ 50Hz 12.5 KVA
( 3 x 400V ~ 50Hz 15 KVA )
5.5 kW
( 7.5 kW )
7.8 kW
( 11 kW )
35 Nm
( 48 Nm )
50 Nm
( 70 Nm )
10 - 8000 rpm
( 10 - 10000 rpm )
ISO 40 / BT 40 x 45°
650
120
0.6 (6 bar)
3
/ h at 0.6 MPa
ISO 8573.1 class 2
40 µm
Polycarbonate
1.5 MPa
ISO VG32
90ml
manual
3/8"
Version 1.1.2 dated 2019-05-07
Technical specification