Optimum OPTImill F 80 Betriebsanleitung Seite 350

Brief instruction 808D Milling
SEQUENCE
User
Tool
The tool wear compensation must distinguish the
Wear
interface
direction of compensation clearly!
Step 1
Press the "Machine" key on the PPU.
Press the "Auto" key on the MCP.
Use the direction keys to select the required tools
808D
and their edges.
Machine Pieces
Step 2
Set the tool length wear parameter of axis X in "Length X", the sign determines the
direction of wear compensation.
Set the tool length wear parameter of axis Z in "Length Z", the sign determines the
direction of wear compensation.
Positive value: The tool moves away from the workpiece
Negative value: The tool moves closer to the workpiece
Press "Input" on the PPU to activate the compensation.
Set the tool radius wear parameter in "Radius", the sign determines the direction of
wear compensation.
Positive value: tool is away from workpiece (set radius bigger than real one)
Negative value: tool is close to workpiece (set radius smaller than real one)
Or
Press "Input" on the PPU to activate the compensation.
Page 350
OPTIMUM
M A S C H I N E N - G E R M A N Y
Operating and Programming — Milling