Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Brief instruction 808D Milling
SEQUENCE
Step 2
A new tool edge can be added in this way and different lengths and radii can be
entered as required.
The red circle shows the actual active tool and tool edge,the purple circle shows how
many tool edges have been created and the related data for each tool edge.
Tool list
Type
Geometry
Lenght1
Radius
Tool
Tool
list
wear
A maximum of nine tool edges can be created for each tool!
Different tool lengths and radii can be saved in different tool edges as
required.
Please select the right tool edge for machining according to
requirement!
808D
Active tool no
New
edge
Reset
edge
Delete
edge
Back
Work
Sett.
User
R
data
offset
var.
data
Tool Setup
Load tool into
Spindle
Press the "Machine" key on the PPU
Press the "JOG" key on the MCP
Press the "T.S.M" SK on the PPU
T,S,M
Tool change
Spindle speed
Spindle direction
Activate zerooffset
Other M function
Press ´CYCLE START´
to activate above functions.
Set
Meas.
rel
work.
Press "CYCLE START" on the MCP
Press the "Back" SK on the PPU
Page 312
OPTIMUM
M A S C H I N E N - G E R M A N Y
A tool must have been created in the system
before it can be loaded into the active position.
Enter tool number "1" in "T"
rpm
Meas.
Face
tool
cutt.
Operating and Programming — Milling
Back
Sett.
back
Werbung
Kapitel
Inhaltsverzeichnis
