Operational Modes - Optimum OPTImill F 80 Betriebsanleitung

Signal lamp
Pos.
1
2
3
6.3

Operational modes

Manually controlled operation
The manually controlled operation is allowed in the operating mode "JOG" and in the operating
mode "MDA". Refer to chapter "Manual mode" of the operating instructions of "SINUMERIK
808D".
In JOG mode, you can perform the following machining operations:
Measuring tools

Measuring the workpiece

Setting parameters for face machining of a workpiece blank

Setting the spindle speed and direction, activating other M function and changing the tool,

Setting the axis positions in the relative coordinate system.

In MDA mode, you can create programs, load existing programs from directories in the "Pro-
gram Manager" into the MDA buffer, or execute the current program.
Automatic mode
Refer to chapter "Setup machine" of the operating instructions for "SINUMERIK 808D".
6.4 Programming
For further working steps please proceed as described in the operating instructions "Part pro-
gramming, system, programming and cycles" for SINUMERIK 808D.
Manual resp. part programming:
For this kind of programming, the programs must be created manually and entered in the con-
trol. The direct programming in the DIN-Code is a complex method which requires lots of skills.
Nowadays this task is mostly taken over by CAD/CAM systems which directly create an operat-
ing program using a graphical user interface.
Automatic programming:
By means of the CAD/CAM program (for instance a 3D-CAD program including downstream
co-processor) construction data are transmitted (semi-)automatically to an executable pro-
gram. For this kind of programming a 3D model is designed using a PC. By means of an oper-
ating sequence which is predefined by the user the motion-sequence of the machine are being
calculated. These programs are accessing the tool data base which includes all tool parameters
(speed, feed, diameter, etc.). Due to this systematic program structure the user is able to create
complete programs within shortest time without having any knowledge of the individual program
commands and its syntax.
Operation
Version 1.1.2 dated 2019-05-07
Colour
No
Red Lights up when activity the emergency stop push button
1
Lights up when a disturbance or in set-up operation such as
Orange
2
Lights up in the operating mode "automatic mode" resp. "pro-
Green
3
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Designation
opened safety housing
gram run"
®
F80 | F105 GB
Page 265