Optimum OPTImill F 80 Betriebsanleitung Seite 257

5.3 Elements on the MCP
1
2
12
11
Img.5-3: Machine Control Panel
Elements on the MCP
Element
Excerpt from the manual of the operating instructions for "SINUMERIK 808D OPM Operation"
1
2
User interface, machine control panel
Version 1.1.2 dated 2019-05-07
5
3 4
Drive voltage
Push-button with indicator light
• Indicator light ON, drive voltage activated
• Indicator light OFF, drive voltage deactivated
Element
<Emergency stop button>
Activate the button in situations where
•
•
All drives will be stopped with the greatest possible braking torque.
Handwheel key (with an LED status indicator)
Controls the axis movement with external handwheels.
Translation of the original instructions
OPTIMUM
7
6
Function
Description
life is at risk.
there is the danger of a machine or workpiece being damaged.
M A S C H I N E N - G E R M A N Y
8 9
F80 | F105
®
10
GB
Page 257