Optimum OPTImill F 80 Betriebsanleitung Seite 381

Brief instruction 808D Milling
ISO Mode
Description
This unit describes the ISO operating functions in 808D, compares the similarities and
differences of the machining code in DIN mode and ISO mode and shows how to transfer
and implement the ISO machining program. The examples is ISO mode chapter can be
run in 808D ISO mode.
Content
ISO
function
switch
ISO code
explanation
ISO program
transfer and
operation
End
808D
ISO Mode
Basic Theory
Siemens standard machining codes are implemented in DIN
ISO
mode. The 808D also provides appropriate functions for
function
implementing the ISO commands, but the ISO mode must be
switch
activated during operation.
ISO function switch
Method 1
Press the "Shift" + "System - Alarm" keys on the PPU.
Input the manufacturer's password ("SUNRISE")
Press the "ISO mode" SK on the right.
A dialog box appears prompting whether to activate
the new setting. Select the "OK" SK to activate it.
Page 381
OPTIMUM
M A S C H I N E N - G E R M A N Y
Operating and Programming — Milling
+