Optimum OPTImill F 80 Betriebsanleitung Seite 221

1.18 Environmental protection and water conservation
The CNC-machine is a device to produce, handle and use materials which are hazardous to
water according to §19g of the Water Resources Law.
When operating, decommissioning or disassembling the CNC-machine or parts hereof, please
follow the requirements of the Water Resources Law. Please find detailed information about
this topic in the regulation about devices to treat materials which are hazardous to water.
Safety
Version 1.1.2 dated 2019-05-07 Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
F80 | F105
®
GB
Page 221