Optimum OPTImill F 80 Betriebsanleitung Seite 252

OPTIMUM
M A S C H I N E N - G E R M A N Y
5.2 Elements on the PPU (Panel Processing Unit) front
Img.5-2: Panel Processing Unit
Elements on the PPU
Excerpt from the manual of the operating instructions for "SINUMERIK 808D OPM Operation"
1
2
3
4
GB F80 | F105
Page 252
®
Vertical and horizontal softkeys
Calls specific menu functions
Return key
Returns to the next higher-level menu.
Menu extension key
No function is assigned to this key. Reserved for future use.
Alphabetic and numeric keys
You use these keys to enter characters or NC commands.
Holding down <SHIFT> while pressing an alphabetic or numeric key
allows you to enter the upper character shown on the key.
Translation of the original instructions
Description
User interface, machine control panel
Version 1.1.2 dated 2019-05-07