Optimum OPTImill F 80 Betriebsanleitung Seite 306

Brief instruction 808D Milling
MCP
Moving
axis
The 808D machine control panel (MCP)
is used to control manual operation of the
axis.
The machine can be moved with the
appropriate keys.
MCP
OEM
keys
The 808D machine control panel (MCP)
is used to control OEM machine
functions.
The machine functions can be activated
with the appropriate keys.
808D
Preparation
Axis movement
OEM keys
Page 306
User
interface
Set Meas. Meas.
T,S,M
work. tool
REL
808D (PPU) has eight horizontal SKs on the bottom of the screen. These SKs can
be activated with the corresponding button (located below).
Operating and Programming — Milling
OPTIMUM
M A S C H I N E N - G E R M A N Y
808D (PPU) has eight
vertical softkeys (abbr.
SKs) on the right of the
screen. These SKs can
be activated with the
Axis corresponding button
feedrate
(located on the right).
Act. val.
REL
Act. val.
Work(WCS)
Face
Sett.
cutt.