Optimum OPTImill F 80 Betriebsanleitung Seite 327

Brief instruction 808D Milling
User
Rapid
interface
motion
G00
When G00 is activated in
the program, the axis will
traverse at the maximum
axis speed in a straight
line.
Straight line (parallel/
unparallel to axis)
Machine
Tools and
coordinate
motion
system
T1 D1 M06
Using the "T" command,
the new tool can be
selected. The "D"
command is used to
activates the tool length
offset.
M06 can be also used for
machines with automatic
tool changer.
808D
Create Part Program Part 1




N5 G17 G90 G54 G71
In the program, the feed rate is
defined with "F". Two types of feed
N10 T1 D1 M6
rate are available:
N15 S5000 M3 G94 F300
1. Feed per minute → G94
N20 G00 X50 Y50 Z5
2. Feed per revolution of the spindle
N25 G01 Z-5
→ G95
N30 Z5
G94
N35 G00 Z500 D0
Defines the feed rate in terms of time
(unit: mm/min).
G95
Defines the feed rate in terms of
spindle revolutions (unit: mm/rev).
S
The spindle speed is defined with "S"
N5 G17 G90 G54 G71
S5000
M3/M4
N10 T1 D1 M6
The spindle direction is defined with
N15 S5000 M3 G94 F300 M3 and M4, clockwise and counter-
clockwise respectively.
N20 G00 X50 Y50 Z5
G01
N25 G01 Z-20
When G01 is activated in the pro-
N30 Z5
gram, the axis will traverse at the
N35 G00 Z500 D0
programmed feed rate in a straight
line, according to the feed rate type
defined by G94 or G95.
Page 327
Feedrate
Spindle speed
Feed type
Spindle direction
Operating and Programming — Milling
OPTIMUM
M A S C H I N E N - G E R M A N Y
N5 G17 G90 G54 G71
N10 T1 D1 M6
N15 S5000 M3 G94 F300
N20 G00 X50 Y50 Z5
N25 G01 Z-5
N30 Z5
N35 G00 Z500 D0
N5 G17 G90 G54 G71
N10 T1 D1 M6
N15 S5000 M3 G95 F0.3
N20 G00 X50 Y50 Z5
N25 G01 Z-5
N30 Z5
N35 G00 Z500 D0
Straight line (parallel/
unparallel to axis)