Optimum OPTImill F 80 Betriebsanleitung Seite 231


Lift the CNC-machine carefully from the pallet of the transportation box by means of a crane
or a fork-lift truck.

Bring the CNC-machine with an appropriate handling device, e.g. Electric pallet truck or
fork-lift truck at their firm position.

Make sure that the load attachment does not cause damage to components or paint.
WARNING!
The use of unstable lifting and load suspension gear that might break under load can
cause severe injuries or even death.

"Machine mounting" on page 234
Img.3-1: Transporting by fork-lift truck
3.3 Installation and assembly
3.3.1 Requirements to the installation site
Organize the working area around the CNC-machine according to the local safety regulations.
The working area for operating, maintenance and repair must not be hindered. Follow the pre-
scribed safety areas and escape routes according to VDE 0100 part 729 as well as the environ-
mental conditions for the operation of the CNC-machine.
INFORMATION
The main switch of the CNC-machine must be easily accessible.
Assembly and commissioning
Version 1.1.2 dated 2019-05-07 Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
F80 | F105
®
GB
Page 231