Corrosion Protection - Optimum OPTImill F 80 Betriebsanleitung

3.6.2 Assembly of the coolant / lubricant pumps

Connect the connector plugs of the coolant / lubricant pumps and of the chip conveyor, as
well as the coolant / lubricant hoses of the coolant / lubricant tank. Make sure that the plug
connections are correctly connected.
Connector plug
Coolant / lubricant hoses
3.6.3

Corrosion protection


A corrosion protection is applied on the machine table and on the guiding surfaces for trans-
port and storage. Remove the anti-corrosive agent from the CNC machine before first com-
missioning. Therefore, we recommend you to use paraffin.
3.6.4 Connection compressed air supply

Connect the compressed air supply with at least 6.5 bars to the compressed air connection
of the compressed air maintenance unit.
Assembly and commissioning
Version 1.1.2 dated 2019-05-07
Img.3-7: Connector plug
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
F80 | F105
®
GB
Page 237