Safety Check - Optimum OPTImill F 80 Betriebsanleitung

1.9.4 Polycarbonate windows
Polycarbonate windows which have a safety-critical function with respect to ejected parts, must
be visual inspected by the customer responsible personnel at regular intervals to guarantee the
operational safety of the CNC-machine.
Polycarbonate windows are subject to an aging process and are classified as wear parts.
The aging of polycarbonate windows can not be detected by visual inspection. It is therefore
necessary that the polycarbonate windows to be replaced after a certain time.
A longer exposure from polycarbonate windows by cutting fluids can lead to accelerated aging.
Also from the operator side can coolant agent, detergents, fats and oils or other corrosive sub-
stances cause a deterioration of the polycarbonate windows. The result is a reduced parts
retentivity of the polycarbonate windows.

"Cleaning and replacing of the polycarbonate windows" on page 295
1.9.5 Prohibition, warning and mandatory signs
INFORMATION
All warning and mandatory signs must be legible. Check them regularly.
1.10

Safety check

Check the CNC-machine at least once per shift. Inform the person responsible immediately of
any damage, defect or change in operating function.
Check all safety devices
at the beginning of each shift (when the machine is operated continuously),

once per day (during one-shift operation),

once per week (when operated occasionally),

after every maintenance and repair work.

Check that prohibition, warning and information signs and the labels on the CNC-machine
are legible (clean them, if necessary),

are complete (replace them, if necessary).

INFORMATION
Use the following table for organizing the checks.
General check
Equipment
Protective housing
Signs, Markings
Sight window
Date:
Safety
Version 1.1.2 dated 2019-05-07
Check
Switching function, firmly bolted and not damaged
Installed and legible
Check for mechanical damage (scratches, cracks).

"Polycarbonate windows" on page 217
Checked by (signature):
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
OK
F80 | F105
®
GB
Page 217