Optimum OPTImill F 80 Betriebsanleitung Seite 261

Excerpt from the manual of the operating instructions for "SINUMERIK 808D OPM Operation"
Spindle control keys
8
User interface, machine control panel
Version 1.1.2 dated 2019-05-07
Element
Z axis key
Traverses the Z axis in the positive direction.
Y axis key
Traverses the Y axis in the positive direction.
Y axis key
Traverses the Y axis in the negative direction.
Rapid traverse overlay key
Traverses the selected axis at rapid traverse speed while pressing
the relevant axis key.
Inactive key. No function is assigned to this key.
Incremental feed keys (with LED status indicators)
Sets increments desired for the axis to traverse.
Starts the spindle counterclockwise
Stops the spindle
Starts the spindle clockwise
Spindle speed override switch
Makes the spindle rotate at the specified speed override.
Translation of the original instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Description
F80 | F105
®
GB
Page 261