Authorized Persons; User Positions - Optimum OPTidrill DH 40CT Betriebsanleitung

Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.6.2

Authorized persons

WARNING!
Inappropriate operation and maintenance of the drilling milling machine constitutes a
danger to the personnel, objects and the environment.
Only authorized personnel may operate the drilling milling machine !
Authorized operating and maintenance personnel are specialists instructed and trained by the
operator and the manufacturer.
The operating company must

train the personnel,

instruct the personnel in regular intervals (at least once a year) on
- all safety regulations relevant to the machine,
- its operation and
- generally accepted engineering standards.

check the personnel's knowledge level,

document the training/instruction,

have attendance at the training/instruction confirmed by signature and

check whether the personnel is working safety and risk-conscious and observes the operat-
ing instructions.

define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.
The operator must

have obtained a training regarding the handling of the drilling milling machine,

know the function and mode of action,

before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:

Electric components or operating materials: Must only be worked on by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.
Before starting work on electrical parts or operating agents, the following actions must be taken
in the order given:

disconnect all poles,

secure against restarting,

check that there is no voltage.
1.7

User positions

The user position is in front of the drilling milling machine.
EN DH 40CT
60 Translation of original instruction
Obligations of the
operating
company
Obligations of the
operator
Additional
requirements
regarding the
qualification
Safety
Version 1.0.1 - 2021-07-06