Authorized Personnel; Obligations Of The Operating Company; Obligations Of The Operator; Additional Requirements Regarding The Qualification - Optimum OPTImill MH 25 SV Betriebsanleitung

1.6.2 Authorized personnel

WARNING!
Inappropriate operation and maintenance of the machine constitutes a danger for the
personnel, objects and the environment.
Only authorized personnel may operate the machine!
Persons authorized to operate and maintain the machine should be technical personnel,
instructed and familiarized with the equipment by the operating company and the manufacturer.

1.6.3 Obligations of the operating company

The operator must instruct the personnel at least once a year regarding
all safety standards that apply to the machine,

the operation,

generally accepted engineering standards.

The operating company must also
check the personnel's knowledge level,

document the training/instruction,

require personnel to confirm participation in training/instruction by means of a signature,

check whether the personnel is working in a safe and risk-conscious manner and following

the operating instructions.
define and document the inspection deadlines for the machine in accordance with § 3 of the

Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.

1.6.4 Obligations of the operator

The operator must
have read and understood the operating manual,

be familiar with all safety devices and regulations,

be able to operate the machine.


1.6.5 Additional requirements regarding the qualification

The following additional requirements apply for work on electrical components or equipment:
They may only be performed by a qualified electrician or person working under the instruc-

tions and supervision of a qualified electrician.
Before beginning work on electrical parts or equipment, the following measures must be taken
in the order listed below:

disconnect all poles.

secure against restarting,

Ensure that there is no voltage.
1.7

Operator positions

The operator's position is in front of the milling machine.
1.8

Safety measures during operation

CAUTION!
Danger due to inhaling dust and mist that is hazardous to health.
Depending on the material to be processed and the additional resources used, dust or
mist may be generated that is hazardous to your health.
Version 1.0.1 dated 2015-12-17 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
MH25SV GB
Page 59