Blackmagic Design Videohub Master Control Pro Installations- Und Bedienungsanleitung Seite 32

Locking and Unlocking Routes
To lock a destination, press and hold the desired destination button until it turns blue.
The corresponding source button will illuminate. If you attempt to change sources for a locked
destination, the destination button will flash blue. To unlock a destination, press and hold the
button until it returns to the standard gold color.
Using Macros
If you press a green macro button, it will simultaneously make the crosspoint changes you
have previously configured in Videohub Setup. Each button can be configured with up to 16
crosspoint routes. If you have the 'take' button enabled, the simultaneous change of routes
will only take place when you confirm by pressing the 'take' button. If for any reason the macro
cannot be performed, the button will flash.
Videohub Smart Control Pro configured as an XY controller and with the 'take' button enabled
Using Videohub Smart Control Pro 32