Blackmagic Design Videohub Master Control Pro Installations- Und Bedienungsanleitung Seite 20

The macro assigned in steps 1 to 3 assigns a single routing action to the macro button, but you
can also add a range of other actions to happen simultaneously when that macro is performed.
For example, you may have a project setup that contains a complex sequence of routing
changes. In this case, the entire sequence can be assigned to a single macro button.
Macros let you perform multiple, simultaneous routes
Setup Settings
The settings in the 'setup' tab let you change the name of your Videohub hardware control
panel, set the date and time, as well as change network settings.
If you have more than one Videohub hardware control panel connected to your network it can
be helpful to rename them so they are easier to identify. To change the name, enter a new
name and click 'set'. The 'software' field displays the current version of the Videohub software
installed on your panel.
Blackmagic Videohub Setup 20